WD-40 COMPANY -- WD-40 AEROSOL;CORROSION PREVENTIVE COMPOUND  -- 9150-01-108-7081
<pre>=====================  Product Identification  =====================

Product ID:WD-40 AEROSOL;CORROSION PREVENTIVE COMPOUND
MSDS Date:01/01/1989
FSC:9150
NIIN:01-108-7081
=== Responsible Party ===
Company Name:WD-40 COMPANY
Address:1061 CUDAHY PLACE (92110)
Box:80607
City:SAN DIEGO
State:CA
ZIP:92138-9021
Country:US
Info Phone Num:619-275-1400
Emergency Phone Num:619-275-1400
Preparer's Name:R. MILES
CAGE:09137
=== Contractor Identification ===
Company Name:WD-40 COMPANY
Address:1061 CUDAHY PLACE (92110)
Box:80607
City:SAN DIEGO
State:CA
ZIP:92138-0607
Country:US
Phone:619-275-1400
CAGE:09137

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 50.0%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

Ingred Name:A-70 HYDROCARBON PROPELLANT (ISOBUTANE & PROPANE)
CAS:68476-85-7
Fraction by Wt: 25.0%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM

Ingred Name:PETROLEUM BASE OIL
CAS:64742-65-0
Fraction by Wt: >15.0%
OSHA PEL:5MG/CUM,AS OIL MIST
ACGIH TLV:5MG/CUM,AS OIL MIST

Ingred Name:CORROSION INHIBITOR (PROPRIETARY MIXTURE)
Fraction by Wt: <10%
OSHA PEL:5MG/CUM
ACGIH TLV:5MG/CUM

Ingred Name:WETTING AGENT (PROPRIETARY MIXTURE)
Fraction by Wt: <5.0%
OSHA PEL:500 PPM

Ingred Name:FRAGRANCE (PROPRIETARY MIXTURE)
Fraction by Wt: <5.0%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF
    EYES,SKIN,RESPIRATORY OR G.I. TRACT,TEARING OR REDNESS OF EYES,CNS
    EFFECTS LIKE ANESTHESIA,HEADACHE,DIZZINESS,NAUSEA;INGESTION MAY
    CAUSE NAUSEA, VOMITING, AND DIARRHEA. CHRONIC:IRR
    ITATION,DERMATITIS,LUNG PROBLEM.
Explanation of Carcinogenicity:PER MSDS DATA.
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
    WORSEN.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH IMMEDIATELY WITH PLENTY OF WATER FOR ABOUT 15
    MINUTES;SEEK MEDICAL HELP AT ONCE. SKIN:WASH WITH SOAP & WATER.
    INHALATION:REMOVE TO FRESH AIR;CALL A PHYSICIAN IF NEEDED.
    INGESTION:DO NOT IND UCE VOMITING,SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE,AEROSOL
Extinguishing Media:CO,DRY CHEMICAL,FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
    AREA IF NEEDED.
Unusual Fire/Explosion Hazard:USE EXTRA CARE;EXTREMELY FLAMMABLE (UNDER
    CONSUMER PRODUCT SAFETY COMMISSION REGULATIONS).

==================  Accidental Release Measures  ==================

Spill Release Procedures:SPILL UNLIKELY FROM AEROSOL CANS.LEAKING CANS
    SHOULD BE PLACED IN PLASTIC BAG OR OPEN PAIL UNTIL PRESSURE HAS
    DISSIPATED.REMOVE ALL IGNITION SOURCES;USE SUITABLE INERT ABSORBENT
    MATERIAL IF LIQUID IS  ON FLOOR AND RECOVER FOR PROPER DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
    AREA (BELOW 120F) KEEP AWAY FROM HEAT,OPEN FLAMES OR SPARKS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
    VAPORS/MIST IF ABOVE PEL OR TLV.
Ventilation:LOCAL/GENERAL TO MAINTAIN PEL/TLV.
Protective Gloves:IMPERVIOUS.
Eye Protection:SAFETY CHEMICAL GOGGLES.
Other Protective Equipment:EYE-WASH FACILITIES.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE
    VAPORS/MIST;DO NOT TAKE INTERNALLY.
Supplemental Safety and Health
FLAMMABLE LIMITS (PROPELLANT PORTION)LEL:1.8%;UEL 9.5%.

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Pres:55+/-5 PSI
Vapor Density:>1.0
Spec Gravity:0.71
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT AMBER CHARACTERISTIC ODOR(AEROSOL)
Percent Volatiles by Volume:80.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIAL.
Stability Condition to Avoid:HEAT,OPEN FLAMES.
Hazardous Decomposition Products:CO AND CO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE;DISPOSAL MUST BE
    IN ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.